> >GOST 9759-83
New Reduced price! GOST 9759-83 View larger

GOST 9759-83

M00031554

New product

The standard applies to expanded clay gravel and sand, which is an artificial porous material obtained by swelling during roasting of prepared granules (grains) of silicate rocks (clays, loams, various shales, tripoli, diatomite, flasks, argillite, siltstone) and industrial wastes (ashes and slags of thermal power plants, coal preparation waste), as well as on sand obtained by crushing ceramsite gravel, and used as aggregates in the manufacture of thermal insulation and structural (including thermal insulation) lightweight concrete

More details

In stock

$16.72

-57%

$38.89

More info

Expanded Clay Gravel And Sand SpecificationsThe Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.1 Testing and control of products of mining and non-metallic industry » 4.1.2 Non-metallic minerals, materials and products »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh1 Construction materials » Zh17 Inorganic and organic fillers »


The Document is Replaced With:

GOST 9757-90: Artificial porous gravel, crushed stone and sand artificially produced expanded/foamed gravel, crushed rock and sand]. Specifications

As a Replacement Of:

GOST 9759-76: Expanded clay gravel and sand specifications

The Document References:

GOST 9757-83: Fillers porous inorganic for lightweight concrete. General specifications

GOST 9758-77: Fillers porous inorganic for concrete. Methods of tests

The Document is Referenced By:

GOST 9758-77: Fillers porous inorganic for concrete. Methods of tests

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

SNiP 3.03.01-87: Bearing and enclosing structures

VSN 48-93: Installation Manual for Cast-In-Place Concrete and Reinforced Concrete Tunnel Lining for Transportation Tunnels

Manual for SNiP 2.03.11-85: A manual for monitoring the state of building metal structures of buildings and structures in aggressive environments, conducting surveys and designing the restoration of corrosion protection of structures

Manual for SNiP 2.03.11-85: Designer's Guide to Corrosion Protection for Concrete and Reinforced Concrete Structures

Manual for SNiP 2.03.11-85: Manual on the design of corrosion protection for stone, reinforced stone and asbestos-cement structures

Series 1.132.1-13pv: External wall panels lightweight concrete single-layer single-row cutting for large-panel residential buildings with a step of transverse walls of 3.0; 3.6 m and a floor height of 2.8 m (unified for difficult construction conditions: unevenly compressible soils, subsidence soils, undermined areas)

Series 1.132.1-13pv: Issue 0. Materials for design. Instructions for the manufacture of panels. Panel Assemblies

Series 1.132.1-13pv: Issue 1. One-step panels. Working drawings

Series 1.132.1-13pv: Issue 2. The panels are two-step. Working drawings

Series 1.132.1-13pv: Issue 3. Reinforcing and embedded products. Working drawings

TU 102-454-88: Expanded clay and concrete for building envelopes. Technical specifications