M00031557
New product
The standard applies to oil bitumens, bitumen compositions, raw materials for the production of bitumen, tar, deasphalting asphalt and similar petroleum products and establishes a method for determining the softening temperature of these products on the ring and ball from 20 to 200 ° C.
In stock
Warning: Last items in stock!
Availability date: 07/27/2021
Petroleum bitumen. The method of the determination of softening point by ring and ballThe Product is Contained in the Following Classifiers:
Construction (Max) » Standards » Other state standards used in construction » 75 Extraction and processing of oil, gas and related production »
Evidence base (TR CU, Technical Regulation of the Customs Union) » 014/2011 TR CU. Road safety » Regulations and standards (to TR TS 014/2011) »
PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.9 Testing and control of chemical and industrial products » 4.9.9 Petroleum products of industrial and domestic consumption, lubricating oils and greases, plastic »
ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.140 Paraffins, bituminous materials and other petroleum products »
National standards » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.140 Paraffins, bituminous materials and other petroleum products »
National Standards for KGS (State Standards Classification) » Latest edition » B Oil products » B4 Petroleum products for industrial and domestic consumption » B49 Test methods. Packaging. Marking »
GOST 11506-65: Bitumens. Determination of the softening point
GOST 3722-81: Rolling bearings. Balls. Technical requirements
GOST 400-80: Glass thermometers for testing of petroleum products. Specifications
GOST 6034-74: Dextrins. Specifications
GOST 6259-75: Reagents. Glycerin. Specifications
GOST 6613-86: Square meshed woven wire gauzes
GOST 6709-72: Distilled water. Specifications
GOST 6823-2000: Crude natural glycerine. General specifications
GOST 6824-96: Distilled glycerin
DND MO-004/2004: Recommendations for the selection of asphalt concretes on bituminous rubber composite binder for the upper layers of coatings and wear layers
GOST 10587-84: Uncured epoxy resins. Specifications
GOST 11955-82: Road petroleum liquid bitumen. Specifications
GOST 15125-92: Styroflex, high-frequency, balanced, communication cables
GOST 15836-79: Bitumen-rubber insulating mastic. Specifications
GOST 16557-78: Mineral powder for asphaltic-mixtures. Technical requirements
GOST 17584-72: Cast iron joining rings and fittings for asbestos cement pressure pipes
GOST 21822-87: Petroleum fragile bitumens. Specifications
GOST 22245-76: Viscous petroleum road bitumens. Specification
GOST 22245-90: Viscous petroleum road bitumens. Specification.
GOST 26589-94: Roofing and waterproof mastics. Methods of testing
GOST 2678-87: Rolled roofing and hydroinsulatings materials. Methods of test
GOST 2678-94: Rolled roofing and waterproof materials. Methods of testing
GOST 2889-80: Bitumen hot mastic for roofing. Technical requirements
GOST 28967-91: Petroleum bitumens. X-ray phase method for determination of paraffin
GOST 31015-2002: Bituminous stone mastic mixtures and stone mastic asphalt. Specifications
GOST 32829-2014: Automobile roads of general use. Road marking materials. Methods of testing
GOST 32842-2014: Automobile roads of general use. Bituminous mastics. Test methods
GOST 32845-2014: Automobile roads of general use. Bituminous sealants. Test methods
GOST 4641-80: Сoal tars for road constructions
GOST 515-77: Bitumized and tarred packaging paper
GOST 6617-76: Petroleum construction bitumen
GOST 6942.0-80: Cast iron waste pipes and fittings. General specifications
GOST 6942-98: Cast iron waste pipes and fittings Specifications
GOST 6997-77: Compositions for filling cable joints. Specifications
GOST 781-78: Bitumen oil high-melting softener
GOST 8771-76: Petroleum bitumen for filling accumulator mastics
GOST 9.015-74: Unified system of corrosion and ageing protection. Underground constructions. General technical requirements
GOST 9128-2009: Asphaltic concrete mixtures for roads and aerodromes and asphaltic concrete. Specifications
GOST 9128-2013: Asphaltic concrete and polymer asphaltic concrete mixtures, asphaltic concrete and polymer asphaltic concrete for roads and aerodromes. Specifications
GOST 9128-84: Asphaltic concrete mixtures for roads and airdromes and asphaltic concrete. Specifications
GOST 9128-97: Asphaltic concrete Mixtures for roads and aerodromes and asphaltic concrete. Specifications
GOST 9548-74: Roofing petroleum bitumens. Specifications
GOST 9812-74: Petroleum insulating bitumen
GOST R 52056-2003: Polymer-bitumen binders for roads on the basis of block copolymers of styrene-butadiene-styrene type. Specifications
GOST R 52128-2003: Bitumen road emulsions. Specifications
GOST R 52576-2006: General use highways. Road marking materials. Test methods
GOST R 53171-2008: Automobile roads of general use. Road marking wares. Preformed road markings. Methods of checking
GOST R 55052-2012: Reclaimed asphalt. Specifications
GOST R 55420-2013: General use highways. Cationic road bitumen emulsions. Specifications
GOST R 56211-2014: Uncured epoxy resins. Specification
Manual: Manual for impulse and low consumption fire extinguishing systems
MI 2418-97: State system for ensuring uniformity of measurements. Classification and application of technical means for testing oil and petroleum products
ODM 218.2.003-2007: Recommendations for the use of polymer-bitumen binders based on SBS-type block copolymers in the construction and reconstruction of roads
ODM 218.2.004-2006: Recommendations for the determination of resistance to aging and viscosity of bitumen
ODM 218.2.025-2012: Expansion joints of automobile bridges
ODM 218.3.001-2006: Guidelines for the application of polymer-dispersed reinforcement of asphalt concrete using rubber thermoplastic elastomer (RTEP)
ODM 218.3.007-2011: Rationing of the properties of organic binders depending on climatic conditions and operating conditions of coatings
ODM 218.3.013-2011: Guidelines for the use of bitumen emulsions when arranging protective layers of wear from cast emulsion-mineral mixtures
ODM 218.3.026-2012: Recommendations for the use of high-density asphalt concrete based on polymer-bitumen binders for road pavements in different climatic conditions of the Russian Federation
ODM 218.3.036-2013: Recommendations for the technology of rehabilitation of cracks and seams in existing road surfaces
ODM 218.3.087-2017: Recommendations for the use of asphalt mixes based on metallurgical slag materials for the conditions of the Central Federal District
ODM 218.3.093-2017: Methodical recommendations on the use of a polyurethane binder for strengthening slopes, recesses, bulk structures, cones of bridges and overpasses
ODM 218.5.008-2008: Methodical recommendations on the use of a crack-interrupting layer when constructing road pavements with a polymer-asphalt-concrete coating (for experimental implementation)
OST 218.010-98: Cementing polymer-bitumen road coating on the basis of block copolymers such as SBS. Specifications
OST 3-6461-88: Polishing and affixing resin. General technical specifications.
RD 153-39.4-091-01: Instructions for protection of urban underground pipelines from corrosion.
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy
STB 1520-2008: Materials for the horizontal marking of roads. Technical conditions
STO 218.5.001-2005: Production of mixtures and the device of a rough thin layer coating (STP)
TR 197-08: Technical recommendations on the use of asphalt concrete mixtures modified with old asphalt concrete additives
TU 218 RSFSR 541-85: Road asphalt mixes from rubble of different strength. Technical conditions
TU 35-1669-88: Divynylstyrene-Based Bituminous Polymer Binders and Polymer Asphalt Concrete
TU 5718-001-00011168-2000: Gravel-Mastic Asphalt Concrete Mixes and Asphalt Concrete
TU 5718-001-53737504-03: Blend of sulfur asphalt concrete cast and cast asphalt concrete
TU 5718-001-58528024-04: BITREK Technical Specifications. Bitumen Resin Environmentally Friendly Composite Materials
TU 5718-002-04000633-2006: Cast asphalt mix and cast asphalt mixes
TU 5718-002-53737504-01: Poured Gray Asphalt Concrete Mixes and Poured Gray Asphalt Concrete
TU 5718-003-04000633-2006: Asphalt (hot) and asphalt mixes for monolithic road structures
VSN 123-77: Instruction for installation of paving and roadbeds made from crushed stone, gravel and sand materials impregnated with organic binders
VSN 176-78: Guidelines for the Design and Installation of Corrugated Metal Pipe Culverts
VSN 27-76: Technical Instructions for the Use of Bitumen Sludges for Arrangement of Protective Layers on Roads
VSN 32-81: Guidelines for hydraulic insulation of structures of bridges and pipes in railway, automobile and city roads
VSN 4-94: Industry-Specific Building Code for Installation of Heating Supply Networks with Pipes Insulated with Cold-Applied Heat-Resistant Bitumen-Rubber Mastic
VSP 02.01.32/Russian Defense Ministry: Rules for the production and acceptance of work in the construction of aerodromes of the Armed Forces of the Russian Federation
Manual for SNiP 3.04.01-87: Recommendations on the arrangement of floors (in development of SNiP 3.04.01-87 "Insulating and finishing coatings")
Manual for SNiP 3.06.03-85: Manual for surface treatment on roads
Manual for SNiP 3.06.03-85: Manual on the construction of coatings and foundations of roads and airfields from soils reinforced with cementing materials to SNiP 3.06.03-85 and SNiP 3.06.06-88
Manual for SNiP 3.06.03-85: Manual for the preparation and use of bitumen road emulsions
Manual for SNiP 3.06.03-85: Manual for the construction of asphalt concrete pavements and foundations of roads and airfields
Manual for SNiP 3.07.02-87: Allowance for the production and acceptance of work during the construction of new, reconstruction and expansion of existing hydrotechnical sea and river transport facilities
ODM 218.2.042-2014: Guidelines. Warm asphalt mixes. Recommendations for use
TU 5718.030.01393697-99: Mixes asphalt concrete crushed stone and mastic and asphalt concrete. Technical specifications
|